25-pt. Tune-up for your Pressure Washer

prolongs the life of your equipment.

Cleaning Systems, Inc. performs an extensive 25-pt. tune-up designed for pressure washers to ensure all components and parts are running properly. Often, a tune-up is the best form of preventative maintenance, as it could alleviate costly break downs in the future. Here is what’s included in our 25-pt. tune-up:

1. Check engine RPM or motor amperage
2. Check pump oil condition
3. Check pump oil levels; add or change oil as needed
4. Check pump for proper operation and inspect for leaks
5. Check engine oil condition
6. Check engine oil level, add or change oil as needed
7. Inspect engine oil filter
8. Check drive belts for tension and wear; adjust as needed
9. Ensure belt guards are in place
10. Check pressure and temperature levels; adjust as needed
11. Check coil for soot deposits and lime build up
12. Check nozzles for damage or wear
13. Check hoses for breaks or leaks
14. Inspect trigger gun and wand
15. Check couplers for O-ring wear and coupler damage; replace O-rings, if needed
16. Inspect & lubricate quick disconnects
17. Check burner for proper operation; adjust air and electrodes as needed
18. Inspect burner fuel filter
19. Test unloader valve for excessive wear
20. Clear or replace inlet water filter
21. Inspect electric outlet, cord and voltage
22. Check pulley alignment, adjust
23. Check detergent / chemical suction
24. Check insulation for hot spots
25. Check electrical switches

If you would like to schedule a tune-up, please contact our service department nearest you. We have two locations – Brecksville, OH (near Cleveland) and Mars, PA (near Pittsburgh).